Ash Johnston Racing

17/10/2026

Club day at Geelong

26/09/2026

With the public holiday we hit the track once again to get so laps under us and oh my gosh we found unbelievable speed. As we all know I can’t thank everyone that helps out behind the scenes.

Karl Bond from Kartune for the amazing engines
Jimmy Watson from Watson racing for the chassis
INOX Lubricants for making my karts run completely smoothly.
Ben Riches & Kade Richens from Colac auto care
Elite 3D Solutions
Michael Williams from Williams family
Not So Serious Prints & Gifts
Cyndi Johnston & Steven Johno Johnston for you help and support
And Lee Lansdown for your amazing help and your boys for there help around the track

Not long till the next club day once again have a little break then back too it once again

14/09/2026

What a weekend we had heaps of up 1 little low.

Having great speed all weekend we were finally back up to the pointy end.

Qualified p3/p28 had great speed in qualifying just shy of p1 and p2.

Heat 1 had really good speed contending for p2 tried to make moves but with a couple mistakes had to settle with a p3 finish

Heat 2 found some more speed but kart fell away too quick so definitely need to make some changes.

Heat 3 starting p3 again but we make the move quick and fast on lap 1 to p2 and managed a gap to take it home for p2

Final time after having amazing speed was hoping to find more with a couple more changes but sadly they didn’t work. Started p2 not really were I wanted to start but had to try atleast but sadly just wasn’t the final for me. Sadly set me back to p6.

Still happy to take all the positives back home with me and find out were it all went wrong.

Massive thanks to my parents and uncle for making the trip down on Sunday it was a massive surprise and I really appreciate it so very much.

Massive thank you to my amazing engine builder Karl Bond from Kartune for a rocket of an engine all weekend sadly the driver made a few mistakes and gave the wrong setup to the kart.

Massive thanks to the man that makes my karting more easy and for the karting gear and support Jimmy watson from Watson racing.

Massive thanks to Lee Lansdown for all the support and phone calls with setup ideas.

Massive thanks too zach Findlay for you help with making myself get faster though the weekend.

Massive thanks to the rest of my sponsors
INOX Lubricants
Not So Serious Prints & Gifts
Kade Richens & Ben Riches from Colac auto care
Michael Williams from the Williams family
Elite 3D Solutions

We will see you all at Geelong club day then after that is the final round of vcs at Ballarat

It’s finally great to have 51 back at the pointy end once again see you all soon

08/09/2026

Vcs round 4 photos

07/09/2026

Geelong club day

It was a cold day at Geelong kart club on Sunday. Running 2 classes again but back in the long track formation. Both kart handled amazing all weekend but I’ll definitely need to work on getting faster

Tag 125 open light.
Qualified P1/p6 with the fastest lap 44.872 and second place being 45.216.

Heat 1 started P1 and finished P1.kart felt amazing all race and was very happy with the set up so I decided not to touch that kart.

Heat 2 got off to a bad start tangling with another kart but it is racing we fought back and stole P2 away from Glenn was just very luck he opened the door for me. But we were struggling with the kart not releasing off the corners.

Final time we done some changes and the kart became completely alive opening a good gap finishing P1

Restricted light

After limited practice it was all or nothing

Qualified P1/P12 fastest lap being 45.642 and second getting46.280

Heat 1 and 2 was on a great setup and was managing tyre wear.

Final time after some amazing battles with a young driver named Beau we have been practicing together for a very long time so to be able to battle each other is amazing.

Massive thank you too all my sponsors
Karl Bond from Kartune for all my amazing engines and all your help tips and tricks
Not So Serious Prints & Gifts
Kade Richens & Ben Riches from Colac auto care
Jimmy Watson from Watson racing for all the gear
INOX Lubricants
Elite 3D Solutions
And the Williams family Michael Williams

On behalf of the team at Johnston racing happy Father’s Day to all dads in the world

See you all at vcs

29/08/2026

Geelong practice today before the club day next weekend mainly focusing on the tag kart this weekend. Let’s find some speed

Massive Thanks too all my sponsors
Karl Bond from Kartune for this amazing engine you give me
Watson for all my karts and parts
Michael Williams from the Williams family
INOX Lubricants
Kade Richens and Ben Riches from Colac auto care
Elite 3D Solutions
Not So Serious Prints & Gifts

13/08/2026

09/08/2026

Geelong club day

This was a different weekend we had

Let’s just start from the start. Saturday we had great speed in both karts the tag kart was still super fast no changes were required. Changed the tyres to a newer set on the restricted kart and it resurrected the kart back to what it used to be but the weather gods had other plans in mind the rain came. Before the track closes for the day we got 1 kart setup done for the wet on Sunday but I still had a lot of work to do the next day to get them both race ready.

Sunday the race day.

After a struggling weekend last club day we push hard to have a better weekend this time.

Let’s start in order tag light it was a wet qualifying didn’t have the right pressure in the tyres so it was a very hard kart to control but I was able too pull a p3 finish. We were combined with the open class which are dd2 karts paddle shift

With the heats coming up we changed pressures to get those wets to come up to temp and that’s what they did on heat 1 and we we’re blitzing creating a nice move on a great driver named kosta and with the door he left open for myself I took it and was able to hold on too that lead.

Heat 2 I took the gamble and went back to slicks but I ran out of time to put my torsion bar back in which made the kart hard to put it in the corner but my next class will tell you why

Final time with the practice from yesterday we used the knowledge and set up and we were gone but not just that we were leading the dd2 class but with there extra speed on the straight he picked me off on the last 2 laps but was on his bumper through the corners like glue. Still finished p1 in class very happy for this result

Restricted light this class was straight after tag light so once I came in it was run to the next kart and jump back in and go

Qualified p5 same problem wrong pressure again

Heat 1 found massive time and pulled a p2 finish but there was more time to find

Heat 2 we done the same gamble but this time I didn’t forget the torsion bar so the kart actually turned the corners. Finished p2 in that race but it was a drag race too the end only being 0.041 of a gap to the line. Massive congrats to buea for holding me off I’ve done heaps of laps with you mate and you are becoming a great driver. Great to have you in the same team.

Final time starting p2 and we had a mega start and set sail and left the group hold p1 all the way too the finish but with massive lap times that helped me and consistency. Finishing 11.461 seconds ahead of second.

Massive thank you everyone for there amazing help

Bryce Hanson for your help with the karts when I came in it was a massive helping hand with that thank you so much

Big thanks to lansdown for your amazing support with warming the restricted kart up and getting it too the grid for me when I was out in the tag kart.

Massive thanks too mum and dad for coming down and supporting me. Dad thanks heaps for coming after you had a big surgery on your brain.

Massive thank you to my sponsors
Karl Bond from Kartune for these rocketship of engines having you in my corner is bloody amazing. These engines are so reliable and super fast thank you so much for what you do for all of us.
Elite 3D Solutions for your amazing products
INOX Lubricants for all your support and amazing products
Not So Serious Prints & Gifts
Ben Riches and Kade Richens from Colac auto care
Michael Williams from the Williams family
And this guy that supplys this team with amazing gear Watson from Watson racing I can’t thank you enough for all your amazing support you are truly one of a kind and I’m happy to be in this team with you.

We are back with the double podiums let’s go 51

We will be right back for vcs in Horsham see you all there.

08/08/2026

City of Melbourne titles

What an unexpected even going in with high hopes of hopefully finishing higher than I did last year well wasn’t the case. None the less we take it back as track and kart data and we tried different things and learnt a lot.

Having good speed with practice 1 and 2 we done a change for practice 3 and went completely backwards. Worst thing is the set ups we had weren’t for a cold greasy track.

Saturday rolls in with a nice super cold morning at 8am roll out. Kart felt good but only gave us slow times not having the grip I needed. Qualified p22 not the start I needed.

Heat 1 with an upsetting qualifying we put our heads together to give us a better kart to battle with and we found speed with 2 laps in we made it too p12 only to get driven over and caused massive damage. Broken tie rods, bent stub axel and bent steering column.

Heat 2 with limited data we ran off of we didn’t make the figures we wanted in this race finishing p23

Heat 3 we tried a different set up again but we wet cut short with a fouled plug on roll around lap

Now time for the final. Started 2nd last and was trying to get up from p32. Off too a great start creating moves and finishing p18 but due to drop downs finished p20 all and all happy for the result after all the drama we had this weekend with limited track time

Big thanks too everyone for all there help this weekend couldn’t of done it without you

29/07/2026

It’s all on heads down Thursday, Friday, Saturday and Sunday for the City of Melbourne. Excited and nervous as we are going the opposite direction never driven on it going the other way but it won’t stop us from trying. Can’t thank all the amazing supporters and sponsors

Cyndi Johnston [Mum]
Steven Johno Johnston [Dad]
Dylan Wayne
Monique Johnston
Nathan Felsner
lansdown [mechanic]
Also his son Beau and Kane
@ Lochlan Ratkowski for also coming down this weekend aswell can’t thank you boys all enough for offering to help in the pits.

Massive thank you to my sponsors with out you all wouldn’t be able to race this weekend
auto care ( Ben Riches & Kade Richens)

Karl Bond from Kartune for your amazing engines you deliver me day in day out

Michael Williams from the Williams family

INOX Lubricants for your support

Elite 3D Solutions

Not So Serious Prints & Gifts

And massive thank you to Watson from Watson racing for giving me a chassis to race with.

Let’s bring it on team 51 🔵⚫️🔵⚫️🔵⚫️🔵⚫️