UrbanWheelz

UrbanWheelz Cairns’ home of electric scooters & skate gear. Huge range + professional servicing & repairs.

Buy with confidence — expert advice, QC builds & aftersales support.
📍 Visit us in-store or shop online

11/09/2026

Accidentally ordered a few too many boards…… so naturally we built another skate wall 😂🛹

Now loaded with fresh new completes ready to roll.

📍Urban Wheelz Cairns

09/09/2026

🦈 Back from 1986 - Shur Shark Reissue 🛹

A piece of New York skate history is back.

The original 1986 Shut Shark brings one of Shut’s classic early era designs back to life, complete with the wide shaped old-school profile that defined mid-80’s skateboarding.

Weather you’re building a proper retro setup, adding to the collection, or just love the unmistakable shape of vintage decks, this one is seriously cool 👌

When you're 90% legs, 10% snacks, and 100% skateboarding 🐾🛹
28/08/2026

When you're 90% legs, 10% snacks, and 100% skateboarding 🐾🛹

Scoot squad goals! These two tiny scoots just rolled into the workshop for a tune-up 😍😍
27/08/2026

Scoot squad goals! These two tiny scoots just rolled into the workshop for a tune-up 😍😍

Bruce approved 🐾The Segway E3 Pro is built for comfort and confidence. It delivers exceptional value at only $999 for ri...
19/08/2026

Bruce approved 🐾

The Segway E3 Pro is built for comfort and confidence. It delivers exceptional value at only $999 for riders seeking a smarter more affordable way to move.

03/08/2026

New Complete Feeling Tight? It May Just Need a Quick Adjustment.

Some new skateboard bearings can feel slightly resistant straight out of the box.

CAUSE 1: FACTORY LUBRICANT
New bearings come pre-lubricated to protect them and keep them running smoothly. On some bearings, this lubricant can create a little extra resistance before it has evenly distributed through the bearing.

THE FIX

✅ Ride the board and allow the bearings time to bed in.
✅ The lubricant will distribute as the wheels rotate.
✅ After a few sessions, the bearings may begin to roll more freely.

The bearings are breaking in—not becoming loose.

CAUSE 2: AXLE NUTS ARE TOO TIGHT

Complete skateboards are assembled before shipping, and the axle nuts may occasionally be tightened enough to place pressure on the bearings.

A quick check with a skate tool can help:

🔧 Spin each wheel by hand.
🔧 If a wheel feels restricted, loosen the axle nut by a very small amount.
🔧 The wheel should spin freely with only minimal side-to-side movement.
🔧 Do not loosen it so far that the wheel rattles on the axle.

The important thing to remember is that bearings break in—they do not simply become loose.

⚠️ Avoid spraying bearings with WD-40 or removing their factory lubricant unnecessarily.

Still not rolling smoothly? Bring your complete into Urban Wheelz and we can check the wheels, bearings and axle-nut adjustment for you.

🛹 Fresh completes just hit the floor!These two little shredders have already locked in their new setups — and there are ...
22/07/2026

🛹 Fresh completes just hit the floor!

These two little shredders have already locked in their new setups — and there are plenty more ready to roll.

From first pushes for the tiniest riders to solid setups for teens and adults, we’ve got completes for every level.

Pop into Urban Wheelz and find your perfect setup! 🤙


15/07/2026
🚨 Confused about the new Queensland e-scooter laws? Let’s clear it up.From 1 July 2026, Queensland introduced new rules ...
06/07/2026

🚨 Confused about the new Queensland e-scooter laws? Let’s clear it up.

From 1 July 2026, Queensland introduced new rules around e-scooters and personal mobility devices, and we know this has left a lot of riders wondering: “Is my scooter still legal?”

At Urban Wheelz, all electric scooters we sell are supplied in a speed-limited configuration, with a maximum motor-propelled speed of 25 km/h.

This has been our standard practice even before the new laws came into effect.

That means if your scooter was purchased from Urban Wheelz and remains in its original 25 km/h limited configuration, it is set up for Queensland public-use compliance, provided it is ridden in accordance with the current road rules.

Riders still need to follow the rules, including:
✅ 25 km/h maximum where permitted
✅ 12 km/h on footpaths
✅ 12 km/h when passing pedestrians on shared paths
✅ Helmet use
✅ Riding only where e-scooters are permitted

If a scooter’s settings are manually changed to allow speeds above 25 km/h, it may no longer be compliant for public use.

If you’re unsure whether your scooter is still in the correct limited setting, come and see us in-store. We’re happy to help check your scooter and explain the current rules.

E-scooters are not banned — they just need to be compliant and ridden responsibly.

Urban Wheelz is here to help keep Cairns riders rolling safely, legally and confidently. 🛴

Address

88-90 Mulgrave Road
Cairns, QLD
4870

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 1pm

Alerts

Be the first to know and let us send you an email when UrbanWheelz posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to UrbanWheelz:

Shortcuts

Share