08/19/2026
Your first REVOsafe™ mow starts before you ever cut the first blade of grass. 🌱
A few minutes of proper setup can make a significant difference in your REVOsafe experience.
Before your first mow, verify that your REVO6 2.0 hubs and spacers are properly installed, confirm your REVOline is properly seated with approximately 1/2" clearance from the mower deck, and engage your mower at approximately 1/4 to 1/2 throttle before increasing to normal operating speed.
For your first cut, we recommend beginning around a 3.5" cutting height, then adjusting higher or lower based on your lawn, terrain, grass conditions, and desired results.
Remember, the REVO6 2.0 uses six REVOline cutting elements per hub and can continue operating with a minimum of three properly installed lines per hub.
REVOsafe is a different approach to mowing, and learning the system is part of getting the best performance from it.
Your Safest, Most Efficient Mowing Ever.
SAFEMOWING.COM