Comer's Trade Post

Call Website

Comer's Trade Post Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Comer's Trade Post, Outdoor & Sporting Goods Company, 18 Dement Road, Sikeston, MO.

Before and After:  A customer sent me a  Rogers and Spencer to be defarbed.  It had a lot of pitted metal, especially on...
10/23/2026

Before and After: A customer sent me a Rogers and Spencer to be defarbed. It had a lot of pitted metal, especially on the cylinder and barrel. He didn't think it could be blued but at least wanted the modern markings off. I worked on smoothing out those bad spots and then rust bluing it. Gave it a little bit of a used look since there were still some scaling/stains from where some of the worst pitting had been.

Got a Brown Bess?  Would you like a more authentically marked lock plate?  I can take care of that for you.  I'll remove...
10/22/2026

Got a Brown Bess? Would you like a more authentically marked lock plate? I can take care of that for you. I'll remove the Grice and year mark, then it will be engraved with either Tower or Dublin Castle (your choice) and a nice crown and arrow will be engraved under your frizzen. $100 for the Tower and $150 for the Dublin Castle due to the greater number of letters.

10/20/2026

Getting a few used things coming in that might be of interest: a Miroku 1863, an Armisport 42 and a Pedersoli 61. Keep an eye out on the website.

10/17/2026

Well, here's the latest on my departure from defarbing. In short, I'm not departing. After hearing from a number of people and giving a great amount of thought to it, I have decided will continue to do defarbs but will limit how many guns I have in the shop at a time to keep from getting in the overloaded situation I am now in.

I am also going to be doing an informal 'apprenticeship' with Landen Wilson, who has expressed great interest in learning this work and eventually setting himself up in business. Landen will be spending time in my shop as his career and time allow. Eventually, he will be ready to take on this kind of work and I will be able to ease out of the picture.

As I thought about leaving the business, I realized that I really do enjoy it even though it can be incredibly frustrating at times. I don't do too many things very well in this life but I do ok at this so I have decided I will keep at it a big longer. Hope that's ok with everyone.

I was cleaning up the photo folder on my phone and came across these.  A while back, I had an original musket, I believe...
10/08/2026

I was cleaning up the photo folder on my phone and came across these. A while back, I had an original musket, I believe it was a 42 Springfield. The sling swivel pin was broken and it gave me a chance to really look at how sling swivels were attached originally. It was a rivet and not pin or taper pin as is the norm now. I knew they were riveted but had never wanted to take one off an original to look because it would have been ruined. Here's a couple pictures.

Folks, whenever you mess with a fi***rm, please remember to check it to see if it's loaded.  If someone hands it to you,...
09/27/2026

Folks, whenever you mess with a fi***rm, please remember to check it to see if it's loaded. If someone hands it to you, they should check it before handing to you and then you should check it to make sure everything is clear. Someone dropped off a .22 to see if I could find some parts for it. When I got to it, I found one of these in the chamber with the rest in the tube ready to follow. This is how accidents happen. Luckily, the safety was on.

While I mostly work on black powder guns doing defarbs and smith work, I do have local customers too who bring me modern...
09/26/2026

While I mostly work on black powder guns doing defarbs and smith work, I do have local customers too who bring me modern fi***rms for work. Got done shaping and finishing a new stock and forearm on this Savage 303. The customer had the cut stock which is always nice, but it needed a lot of fitting and sanding. This stock is more robust that the original. Has a good feel to it I think. Cleaned up the receiver and the bluing on the barrel. While the polymer guns prevalent today have their place, theres nothing quite like wood and steel when combined into a nice fi***rm.

09/21/2026

Some of you may have heard that Goex announced earlier this month that they were going to be making black powder again.

Now before you get all excited about having plenty of powder on the market you need to take a look at who is funding the upgrades, facilities etc at the plant: The Dept of War.

The American Rifleman, one of the flagship publications of the NRA wrote a story on it and mentioned that the DOW invested $3.5 million to upgrade the facility. And, they already have an order in for over $8 million.

The military still uses a LOT of black powder and since it is their money going into this they are going to certainly be the first to get whatever the plant is making. And, they've been using quite a bit.

So, don't get overly excited and be patient. I'm sure it will eventually get down to our level but don't think you're going to be able to buy a bunch of it in the next few weeks.

Speaking of the NRA I'm a Life Benefactor member and would encourage anyone to join the NRA or one of the other 2nd Amendment friendly groups out there. And, if you've heard bad things about the management of the NRA etc, all those people have been tossed out and the organization is getting back to what it was founded to do: Protect the 2nd Amendment and shooting and hunting sports. So they might be worth taking a look at if you haven't lately.

That's my plug - if you want to protect your reenacting hobby and shooting sports and hunting activities, there's more strength in numbers you know.

I would add I'm also a Life Member of the Second Amendment Foundation. Well, that's my soapbox for now.

Hopefully we'll see Goex become available to the hobby before too long.

A while back I put an original Maynard system lock into a reproduction musket.  It was somewhat tedious fitting it but i...
09/15/2026

A while back I put an original Maynard system lock into a reproduction musket. It was somewhat tedious fitting it but it turned out pretty well and the owner was happy with it.

I've put some photos of the lock I had to work with plus some that I pulled off the internet just in case some folks may not be familiar with the system. The first photo is the finished product with the original lock in the repro stock.

The 1855 Springfield was made to use the system and, at first blush, it probably seemed like a good idea. Having the primers advance automatically would save time and a soldier wouldn't need to fumble for a percussion cap for every shot.

But, they look like the caps we played with as kids and they're not that far removed from that. You can imagine the shortcomings this system would prove to have and the 61 Springfield went back to the percussion system. Still, it is a pretty cool thing to see.

Address

18 Dement Road
Sikeston, MO
63801

Alerts

Be the first to know and let us send you an email when Comer's Trade Post posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby gyms & sports facilities