RoadCone Racing

RoadCone Racing RoadCone Racing is a spot for updates on our Race Team, Sponsors and News! Thank you for likes/follow

So you have a high performance car, let talk maintenance! Was talking with a friend and was discussing things that keep ...
01/01/2026

So you have a high performance car, let talk maintenance!

Was talking with a friend and was discussing things that keep these units performing and lasting. Here are some of the things i believe you should address.

1. Change oil often! With huge injectors this is a must! I try not to start unless I’m going to use the car or go somewhere. It seems idle time saturates the fuel.

2. Use quality fluids, especially if running E, get an oil that will hold up to it. Turbos, spend the extra money on a good trans fluid that will stand up to the heat. I choose LAT.

3. Change spark plugs (I’m guilty of not doing this one enough). Ever had a car break up running down the track, change the plugs and it mysteriously goes away? Scary at first, until you check the plugs and realized you should have changed them a while ago!

4. Constantly go every nut and bolt! HP and vibrations can loosen things up, and a pass is not the place to find this out.

5. Winterize your car! I drain the coiling system and circulate some antifreeze into it. I also drain the watertank and put RV antifreeze in it. Don’t want it to freeze and ruin a good intercooler! I also keep mine up on stands and in a heated garage to avoid these types of issues.

What are some of your alls suggestions and experiences?

Whats it take to make ALL the Power?Well i have never went into the motor build  by Next Gen Performance Center built by...
12/31/2025

Whats it take to make ALL the Power?
Well i have never went into the motor build by Next Gen Performance Center built by - Adam Humm

We started with an extra strong base, a Bear Block prepped by TKM. We filled in with the best parts such as Winberg 3.8 Stroked BILLET crank, Callie’s Ultra Billet rods, CNC Ported heads, Ferrea valves (Iconel on the exhaust side),Billet cam caps, RGR Timing Componets, lockouts and custom and ATI Balancer, GT500 Oil Pan, Boundary 5.2 OPG Ported

There is a lot more to the build than meets the eye. They were a pleasure to work with and updates were consistent! I highly recommend checking them out!

Questions are welcome! Your alls thoughts on build are also welcome. ENJOY THE PICTURES!

🎄🎅
12/24/2025

🎄🎅

Photoshoot at Muncie! Don’t believe I ever posted these!Which is your favorite?Precision Turbo & EngineFinish Line Perfo...
12/22/2025

Photoshoot at Muncie! Don’t believe I ever posted these!

Which is your favorite?

Precision Turbo & Engine
Finish Line Performance LLC

Braggin Rights was a lot of fun! Thanks TJ for sharing!
12/20/2025

Braggin Rights was a lot of fun! Thanks TJ for sharing!




12/14/2025

Tin Soldier Racecars has built Joe Glockner on Bad Unit!!
🔥🔥

12/14/2025

When my family ask “Where’s your Christmas Money!?”

12/02/2025

All ready to go! Still up on stands detailing the bottom! Is that too much!?

Off season is here and time to start detailing RoadCone!
11/15/2025

Off season is here and time to start detailing RoadCone!

Starting to feel like a Pro-Mod!!I cant say enough good things about Lonnie and his crew!! THANK YOU!Extreme Automatics ...
11/11/2025

Starting to feel like a Pro-Mod!!

I cant say enough good things about Lonnie and his crew!! THANK YOU!
Extreme Automatics had always taken such good care if me.

Told them time to cut the trans tunnel out so i can look at this Unit they built for RoadCone! And it matches the ProTorque Converter. Jewelry for your HotRod!

It’s that time of year with the snow starting to fly! Already some awesome mods that should be completed this week. 👀Dec...
11/10/2025

It’s that time of year with the snow starting to fly! Already some awesome mods that should be completed this week. 👀

Decision time. I have enjoyed racing the car, I love the clean build and all my creature comforts. But weight 3875lbs has always held the car back somewhat.

Is it time to cut weight?? What should be some of the items to eliminate? 🤔





Walter just hit a PB in his  ProCharger Superchargers, tuned by Palm Beach Dyno Mustang  1.18 60ft and 5.08 in 1/8! Def ...
11/04/2025

Walter just hit a PB in his ProCharger Superchargers, tuned by Palm Beach Dyno Mustang

1.18 60ft and 5.08 in 1/8!

Def a 7 second Unit!

Now to get to a 1/4 track and see how fast it will go!

Address

10349 River Rd
Denton, MD
21629

Website

Alerts

Be the first to know and let us send you an email when RoadCone Racing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share