Scull Tech UK

30/05/2026

We’ve just finished a couple of boats and we’re already half way through a batch of oars. We’ve done sleeves, collars, handles, and even managed a snapped loom. We’ve now progressed on to painting, and you can start to see some lovely blades. 😊😊😊👍🏼

29/05/2026

Dare I say it, that might be another boat good for the river. Jez will be back at Warrington Saturday morning in time for the morning sessions ⭐️⭐️⭐️

26/05/2026

Very nearly there with Jez. Only beaten by the mosquitoes today as we approach the final stretch. Looking forward to having another boat ticked off ✅

25/05/2026

24/05/2026

Day two and first puncture repaired and drying off in the evening sun. This one was a pleasure to do, and behaved like it’s supposed to. The second one on the other hand is being a brat, and putting up a fight…

23/05/2026

End of day one in Southport, and we’ve covered a lot of ground. Internal skin, and two external skins down. It’s took a full day at it, but should hopefully ready to start moving onto paint in the morning 😅😅😃😃👍🏼

23/05/2026

Today we’ve run out to Southport to get one of the clubs fours back on the water after picking up storm damage earlier in the year. Two reasonably sized impacts to the hull with one going straight through means we have a busy wkend. We’re looking forward to seeing the end result. 😉👍🏼

21/05/2026

All skins down and what should be a nice watertight single. Next job up is paint prep, and our Hudson should start to feel much more like it’s super self again 😊👍🏼

19/05/2026

This afternoons exercise, exploring anything that might be causing our little friend issues on the water. Considering the volume of water that was inside the boat there was no gaping holes which one might have suspected.

A few hairline cracks and one small puncture, it’s likely to have been a combination of the three proving too much to handle.

Next, we will be patching him up and begining the fairing process 😊👍🏼

17/05/2026

Next boat up for some TLC is a Hudson single taking on lots of water with a few suspect areas including the fin area. We will be stripping it back, drying him out and making him water tight again.