Our finished product BCW Lubricant is laboratory tested and achieves stability above 180 degree flash point and extreme low viscosity to slip through the bearing seal to provide surface tension to envelop each bearing ball. For maximum performance for bicycles. Protect bearings and take them to a level beyond smooth. Make them glide. BCW lubricant optimized for bearings. It purposely creates an ab
solute smooth, extra low friction environment necessary for bearings. A secret formula provides extremely low rolling resistance. It creates an excellent environment for bearing to perform at the highest level. An unique formula is used to improve and smoothen the bearing components motion maximise the bicycle components efficiency to allow the cyclists enjoy the full potential of individual bicycle components smoothness. BCW Bearing Lubricant Application :
Our BCW bearing l**e can be applied to the bearing in a few methods as below.
1, Topically apply by letting BCW bearing l**e slip through the fine gap into the bearing as it is compatible with the existing grease inside.
2, Open up the hub, bottom bracket, jockey wheel and etc and remove the bearing seal and drip a few drops of BCW bearing l**e to with or without the existing and/or new grease.
3, For racing we strongly recommend removing all the grease from the bearing and only apply BCW bearing l**e where this will allow bicycle components with bearing to have best results of zero drag resistance that are caused by grease. TS Chain Lubricant :
TS Chain l**e is a liquid lithium grease. Liquid lithium grease is widely used in marines, aeroplanes and heavy machinery as lithium grease is the best match for chain lubrication with high speed shifting. Our unique special formula for all weather use had made it into liquid form and coat well for the chain with the correct viscosity allowing it to slip between chain links yet non-sticky enough to trap dirt particle grime and soil. We would like to share with your what TS Chain Lubricant is all about :
1. TS Chain Lubricant is a liquid lithium grease providing superior coating for your chain. It's uniquely low viscosity enables the lubricant to slip in-between the chain link and l**e the chain pin. It also has high temperature properties allowing it to withstand up to 180 degree flash points.
2, Most Chain Lubricants are Teflon, Nano, Wax or Ceramic and till date there is no degreaser that is designed to completely clean these 4 types of l**es.
3. To have a smooth and well lubricated chain, it is important to be able to thoroughly clean the chain first before lubricating it. If not, you will just be applying your l**e over residue dirt. This results in faster wearing off of components causing damage to your drivetrain components. D'grease Solution Liquid Solvent Degreaser :
Multipurpose Cleaning Solvent (waterbase) Degreaser design for cleaning off stubborn grease or dirt & grime. Non toxic and degradable. Suitable to use on household cleaning too.
