Braydan Willmington Motorsports

Braydan Willmington Motorsports Racecar Driver 🏁
Statewide Bearings Bullitt Mustang #89
Sprintcar 89N | Midget 89BW
Marulan, Australia 🇦🇺 Deep in the dirt.

Braydan’s career on four wheels began where so many Australian stories do. Braydan began his career in Junior Sedans, winning the Rookie of the Year Championship, and the Goulburn Speedway Track Championship. Braydan later transitioned into senior racing categories including Legend Cars and Midgets, winning Rookie of the Year and the NSW Silver Cup State Championships. In 2016, he made the leap to

Sprintcars where, alongside Midgets, he has spent most of his seat time. After racking up hundreds of wins and more than a few championships on home soil, Braydan set his sights on the dirt tracks in the USA. In 2018, Braydan raced 410 Non-Wing Sprintcars and Midgets in the US against some of the best racers in the world, with some Heat and B-Main wins as well as some top 5 finishes in the feature events. Including a charge from 16th to 3rd position at Montpelier Motor Speedway in the Midget, and a strong 5th position finish in his 410 Non-Wing Sprintcar debut at Gas City I69 Speedway. Braydan also holds the legacy of being the first Australian to race the dirt track at the famed Indianapolis Motor Speedway in the inaugural BC39 Midget race, honouring the late Bryan Clauson. The next step in the Braydan Willmington journey is Touring Car Racing (TCR) Australia, following in the footsteps of his father - Bathurst legend - Garry Willmington. The series is part of the hugely successful TCR formula adopted in more than 30 countries and regions worldwide. It delivers the thrill of door-to-door racing in market relevant cars that Australians are buying and driving every single day. In this case, it’s a race-winning Alfa Romeo Giulietta Veloce TCR, developed by famed Italian auto racing team Romeo Ferraris and supplied by Australia’s very own Garry Rogers Motorsport. In 2022, Braydan Willmington Motorsports will compete in all seven TCR rounds, including the Bathurst International

18/08/2026

I’ll never pass up the opportunity to drive something with a sequential gearbox 🤩

Check out one of my laps from Sydney Motorsport Park last week in Fred Geissler’s Chev powered BWM Sports Sedan.

Statewide Bearings | SWB Plus | Frango Charcoal Chicken | The Timken Company | Fire Service Plus | Tsubaki | JIE Gearmotor | Gates | Blast It Abrasive Blasting and Industrial Coating | Xtek | Ringfeder | Carlisle | Hydromec | www.wtesa.com.au | Shockworks | CMS | Lee & Thomas Auto Electrical | THK Linear Motion| Vibco Vi*****rs | WPT Power | Brisk Australia | WOLF Aeronautical

12/08/2026

We think Matt Nikiforoff practices this one a bit much 🤔😂

I also thinks it’s too cold in Melbourne 🥶

Who agrees with Garry? Does our Mustang make fantastic sound?

🎥 Chloe Maree

Statewide Bearings | SWB Plus | FRANGO | The Timken Company | Fire Service Plus | Tsubaki | JIE Gearmotor | Gates | Blast It Abrasive Blasting and Industrial Coating | Xtek | Ringfeder | Carlisle | Hydromec | www.wtesa.com.au | Shockworks | CMS | Lee & Thomas Auto Electrical | THK Linear Motion | Vibco Vi*****rs | WPT Power | Brisk Australia | WOLF Aeronautical

Lots was learnt from our weekend at Sandown! The mighty Statewide Bearings Mustang didn’t miss a beat all day, Bri and I...
10/08/2026

Lots was learnt from our weekend at Sandown!

The mighty Statewide Bearings Mustang didn’t miss a beat all day, Bri and I drove the absolute wheels off it for the full 3 hours, and the crew were incredible from start to finish.

We crossed the line with the outright win by almost a whole lap. Unfortunately, we were handed a post-race penalty for minimum drive time. Despite the penalty, we still took the A2 class win, and we couldn’t be happier with the weekend and the performance of the whole team.

Regardless of some of the comments online, we genuinely believe Australian Racing Drivers' Club is doing an amazing job organising this series and supporting the 6 Hour teams. We cannot thank them enough for everything they’re doing to make this series happen, and we’re already looking forward to redemption at Round 3 at Queensland Raceway, 19–20 September.

A massive thank you to our incredible crew for the huge effort all weekend: Dad, Mum, Scott, Stu, Chris, Matt, John, Brayden, Jai, Daniel, Pete, Nick and Chloe.

SWB Plus | FRANGO | The Timken Company | Fire Service Plus | Tsubaki | JIE Gearmotor | Gates | Blast It Abrasive Blasting and Industrial Coating | Xtek | Ringfeder | Carlisle | Hydromec | www.wtesa.com.au | Shockworks | CMS | Lee & Thomas Auto Electrical | THK Linear Motion| Vibco Vi*****rs | WPT Power | Brisk Australia | WOLF Aeronautical

A solid day yesterday with Bri and I qualifying the mighty Statewide Bearings Mustang P3 outright and P1 in class! 💪🏻🔥We...
07/08/2026

A solid day yesterday with Bri and I qualifying the mighty Statewide Bearings Mustang P3 outright and P1 in class! 💪🏻🔥

We’re feeling good heading into today’s race and can’t wait to see what we can do!

You can catch all the action live today on Blend Line TV. Our warm up is at 10:30am and the race starts at 2:00pm AEST

SWB Plus | Frango Charcoal Chicken | The Timken Company | Fire Service Plus | Tsubaki | JIE Gearmotor | Gates | Blast It Abrasive Blasting and Industrial Coating | Xtek | Ringfeder | Carlisle | Hydromec | www.wtesa.com.au | Shockworks | CMS | Lee & Thomas Auto Electrical | THK Linear Motion| Vibco Vi*****rs | WPT Power | Brisk Australia | WOLF Aeronautical

Did somebody say race week? 😍We’re so excited for Round 2 of the Australian Racing Drivers' Club Production Car Enduranc...
03/08/2026

Did somebody say race week? 😍

We’re so excited for Round 2 of the Australian Racing Drivers' Club Production Car Endurance Series at Sandown Raceway this weekend - August 7–8. Who’s coming?

Statewide Bearings | SWB Plus | FRANGO | The Timken Company | Fire Service Plus | Tsubaki | JIE Gearmotor | Gates Australia | Blast It Abrasive Blasting and Industrial Coating | Xtek | Ringfeder | Carlisle | Hydromec | www.wtesa.com.au | Shockworks | CMS | Lee & Thomas Auto Electrical | THK Linear Motion| Vibco Vi*****rs | WPT Power | Brisk Australia | WOLF Aeronautical

06/07/2026

Dyno Joe from CMS has worked his magic once again! We’d be absolutely lost without him, and we’re incredibly grateful for all the hard work and late nights he’s put into getting our Statewide Bearings Bullitt Mustang ready to hit the track.

With our spare engine now swapped in for Round 2 at Sandown on August 7–8, it was over to Joe to work his magic on the dyno. He’s found us extra 20 horsepower over the engine we ran at Bathurst earlier this year!

A huge thank you, Joe, for everything you do. We can’t wait to put it to the test.

Bring on Sandown! 💪🏻🏁

SWB Plus | | | | Tsubaki | JIE Gearmotor | | Blast It Abrasive Blasting and Industrial Coating | Xtek | Ringfeder | Carlisle | Hydromec | www.wtesa.com.au | | Lee & Thomas Auto Electrical | THK Linear Motion| Vibco Vi*****rs | WPT Power | | WOLF Aeronautical

Round 1 didn’t quite go as expected.  and I had been showing great pace all weekend, qualifying P1 in class and P4 outri...
02/06/2026

Round 1 didn’t quite go as expected.

and I had been showing great pace all weekend, qualifying P1 in class and P4 outright, putting ourselves in a strong position for the 4-hour race.

Unfortunately, the brand-new throttle body we had fitted decided it had other ideas and failed 4-laps into the race, bringing our weekend to an early end.

It’s incredibly frustrating to keep encountering mechanical issues that are completely out of our control, especially when we know we have the pace to fight for a strong result. Nonetheless, we’ll keep pushing forward and turn our focus to Round 2 at Sandown on August 7–9.

A massive thank you to Mum, Dad, Scott, Shelton, Nick, Matt, Brayden, Craig, Jamie, Hammo, Zara, Joe, Ben and Stu. We have a fantastic group of people around us and we’re incredibly appreciative for all of you.

A big thank you as well to for putting on a fantastic Round 1. It was an awesome event, and we thoroughly enjoyed being part of it.

On to the next one. 👊🏻🏁

Statewide Bearings | SWB Plus | | | | Tsubaki | JIE Gearmotor | Gates | Blast It Abrasive Blasting and Industrial Coating | Xtek | Ringfeder | Carlisle | Hydromec | www.wtesa.com.au | | CMS | Lee & Thomas Auto Electrical | THK Linear Motion| Vibco Vi*****rs | WPT Power | | WOLF Aeronautical

Not long to go now! 😍
26/05/2026

Not long to go now! 😍

The cat is out of the bag! We’re locked in for round 1 of the ARDC Production Car Series at Sydney Motorsport Park at th...
09/05/2026

The cat is out of the bag! We’re locked in for round 1 of the ARDC Production Car Series at Sydney Motorsport Park at the end of this month! 🤩

We’re excited to be part of this series and really looking forward to sharing the Statewide Bearings Mustang with Brianna again after seeing what she brought to the team at the Bathurst 6 Hour this year.

Stay tuned for updates!

ENTRY SPOTLIGHT 💡 BRAYDAN WILLMINGTON MOTORSPORTS

A family legacy meets a new challenge.

Braydan Willmington Motorsports enters the 2026 ARDC Australian Production Car Endurance Series with the Statewide Bearings Ford Mustang Bullitt.

Braydan Willmington brings experience across speedway and circuit racing, including TCR and S5000. Brianna Wilson brings six Bathurst 6 Hour starts, a class win and three National Karting titles.

With strong roots in production car racing through the Willmington family, this is a team built on experience.

Race Wrap – Bathurst 6 Hour 2026 🏁It wasn’t quite our year again, but it was looking so promising…Unfortunately, yesterd...
06/04/2026

Race Wrap – Bathurst 6 Hour 2026 🏁

It wasn’t quite our year again, but it was looking so promising…

Unfortunately, yesterday wasn’t our day. Brianna, John and I all did an awesome job, keeping the car inside the top 15 all race and even getting as high as 3rd outright at one point. In the final 3 hours, we started to experience an issue with the gearbox. The team made a massive effort to get it changed over, but unfortunately we weren’t able to get it done, resulting in a DNF.

Despite the disappointing finish, we’re incredibly proud of the improvements we’ve made this year and excited to see what we can do next year 💪🏻

We want to say a huge thank you to Scott from Apogee Motorsport for managing the team and having it run as smooth as possible! A massive thank you to our incredible crew: Mum, Dad, Shelton, Joe, Stu, Nick, Hammo, Paul, John, Matt, Jamie, Chris & Chris, Ben, Lesley, Craig, Michelle, Chase, Beck and Dean. And to Brianna and John for all their efforts on and off the track. It was awesome to share the car with you both!

A special thank you to Phil and Justin from Statewide Bearings for making the trip over to be part of the team this weekend. We’ve loved having you here and truly appreciate all your support 🙌

Onwards and upwards…

We cannot thank all of our sponsors enough for making this event possible:
Statewide Bearings | SWB Plus | Frango Charcoal Chicken | The Timken Company | Fire Service Plus | Tsubaki Australia Pty Limited | JIE Gearmotor | Gates Corporation | Blast It Abrasive Blasting and Industrial Coating | Xtec Inc. | Ringfeder | Carlisle Brake & Friction | Hydro-Mec | www.wtesa.com.au | Shockworks | CMS | Lee & Thomas Auto Electrical | THK Linear Motion | VIBCO Vi*****rs | WPT Power | Brisk Australia | WOLF Aeronautical

Address

Marulan, NSW

Website

Alerts

Be the first to know and let us send you an email when Braydan Willmington Motorsports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share