Artisan Equine Australia

Home
Australia
Keysborough, VIC
Artisan Equine Australia

Custom-built horse walkers and treadmills. Designed for racehorses, thoroughbreds, rehab and daily horse exercise. Trusted by horse trainers across the country.

Australian-made, fully tailored to your setup, and backed with real after-sales support. Artisan Equine specialises in the fabrication and maintenance of high-quality equine training equipment like horse treadmills, walkers, crushes, and supporting products like stable mats. All of our products are manufactured in Australia in our Keysborough based factory. We have been supporting our customer acr

oss Australia, both for their Artisan Equine equipment and any other brand of horse training machines such as HorseGym and Magnum Equine.

20/06/2026

Essentials treadmill installation wrapped up in Wodonga for Craig Widdison at Craig Widdison Racing

Craig took delivery of our Essentials model treadmill recently, and we got it set up and commissioned on site.

The Essentials treadmill is built on proven design with the features that matter.

You get all the essential features from our Premium treadmill range, including the
✅ 5-layer cushioned deck to reduce joint strain
✅ the open deck design for easy cleaning
✅ manual controls
✅ a single high-flow fan with three speeds
✅ durable rubber sides
✅ and an operator's platform.

A max speed of 41 km/h is ample when galloping, and up to 6 degrees of incline is perfect for building those hind quarters.

It's a solid, reliable workhorse that keeps horses fit and sound without the bells and whistles of the Premium model.

Craig's a ripper to work with, and we're looking forward to seeing this treadmill get plenty of use at his place.

Want to talk through a treadmill build for your setup? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

17/06/2026

Out at Tom McDermott's place for a service visit on his HorseGym treadmill.

Tom trains performance horses for show jumping, and his treadmill gets regular use keeping the horses fit and sharp. We're out here keeping it in top shape so he can focus on what he does best.

Regular servicing on any brand of treadmill catches issues before they become problems. Belt tension, rollers, bearings, motor performance — we check it all and keep everything running smoothly.

It's the difference between a machine that's reliable day in and day out, and one that breaks down at the worst possible time.

Need a service on your HorseGym or any other brand of treadmill? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

15/06/2026

Water walker stage 2 wrapped up at Mulberry Pastoral in NSW.

This is a custom water walker build we're overseeing from start to finish. We're moving through it in stages to manage the installation properly and ensure everything integrates perfectly.

Stage 1 covered the workings of the walker — the above ground mechanism and in-situ fabrication of the entrance barriers. Stage 2 is now complete: we've laid the rubber mats in the entrance way and also the main walking area of the pool. We've got plenty of stainless steel anchors in place to keep the mats down — 1600 actually. The entrance barriers came back from galvanising, and we've installed those too.

Stage 3 is the stainless steel works for below the water level, wrapping up in about four to six weeks. This will include the outstands to keep the horses off the walls, the baffles to help minimise the whirlpool effect, and all of the gates. Once that's done, this water walker will be ready to go.

Building a water walker from the ground up takes planning, precision, and coordination across every step. The result is a piece of equipment that's tailored exactly to what the customer needs and built to last.

Want to talk through a custom water walker or any other build for your setup? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

13/06/2026

Ferry run across the Hawkesbury River at Wiseman's Ferry in NSW.

Always a good stretch when you're out on the road between service calls. The river's looking good, and the forested hills either side make for a decent drive.

When you're covering ground across the state servicing treadmills and walkers, you get to see some nice country. This one's a pleasant detour.

Need a service or belt replacement? Give us a call on 0431 437 127 or shoot us a message.

10/06/2026

Narrow bay walker loaded and ready to roll for Paul Sweeney in NSW.

This is a 6-horse Premium walker with narrow bays, heading out on the truck today. It's the first of this model we've built, and Paul specifically wanted the narrow bay design to suit his setup.

Some trainers prefer narrow bays to prevent horses from turning around in their bays, which keeps them moving forward and focused on the work. Paul also runs one of our Premium treadmills, so he'll have both a walker and a treadmill to keep his horses fit and working well.

Once it arrives, we'll get out there and commission it properly.

Want to talk through a walker or treadmill build for your setup? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

08/06/2026

Routine service wrapped up at Leneva Park.

This Artisan Equine treadmill gets plenty of work, and it's performing really well. We went through the usual checks, inspected the belt, rollers, and bearings, and made sure everything is running clean and tight.

When you're working a treadmill hard day in and day out, regular servicing keeps it reliable and catches anything before it becomes a problem. The maintenance pays off in the long run.

This one's back in action and ready for more work.

Need a service or belt replacement on any brand of treadmill? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

06/06/2026

Electronical diagnosis and reprogramming wrapped up on this HorseGym treadmill.

We were called out to diagnose this HorseGym treadmill that was not running. We ascertained that someone with electrical knowledge decided to get into the parameter programming section in the Variable Speed Drive inverter (VSD) and change things to address a completely separate issue.

The VSD is basically the brains that controls the operation of the motor. After a few hours of diagnosis working out what had been changed and then reprogramming the affected parameters, it's back up and running like it should.

Here's the thing: VSD’s and treadmill electronics are hugely complex. There are around 1000 different parameters with multiple combinations which can be altered. And changing just one without understanding the others can shut the whole machine down, as was the case here.

Even if you're qualified as an electrician, we don’t recommend changing parameters. If something's not right with your HorseGym, give us a call. We'll sort it out properly.

03/06/2026

Premium treadmill loaded and on its way across the Nullarbor to Upper Swan in WA.

This one's heading to Isaac Pieris, and the truck left yesterday. Installation is happening this week — we'll be making the trip over to get it commissioned and running.

Isaac wanted the Premium model, so he's getting the funnel type barriers, integrated fan within the gate, touch screen controls, and optional rear wall barriers. It's a solid setup for keeping horses fit and sound out in Western Australia.

Looking forward to getting this one up and running.

Want to talk through a treadmill build for your setup? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

01/06/2026

First service wrapped up for Danny Williams in Goulburn.

This Artisan Equine treadmill has been in work for a while now, and it's performing exactly as it should. We went through the usual checks, made sure everything was running well, and gave it a thorough going-over.

Regular servicing keeps these machines running smoothly and catches anything before it becomes a problem. The belt, rollers, bearings, and drive components all get inspected, and if something needs attention, we can usually sort it out on the spot.

Need a service or belt replacement on any brand of treadmill? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

29/05/2026

Service run wrapped up at Bjorn Baker's in Warwick Farm.

Bjorn runs three Magnum walkers, and we get out every six months or so to keep them safe and reliable. This visit covered the usual maintenance plus a bit of in-situ welding work to sort out some wear and tear.

Halfway through the job, a storm rolled in and it was bucketing down. Lucky there was a bit of shelter to work under, or it would have been a long afternoon.

These mono-rail style walkers are solid machines. They're simple, efficient, and built to handle daily work without fuss. We build them here in Australia, from 4-horse units all the way up to 20-horse setups. In fact, we're the only ones in Australia building mono-rail walkers.

Need a service or maintenance on your walkers? Give us a call on 0431 437 127 or shoot us a message.

Made by hand. Built to last. Backed for life.

Address

33 Atlantic Drive
Keysborough, VIC
3173

Telephone

+61431437127

Website

http://www.artisanequine.com.au/

Alerts

Be the first to know and let us send you an email when Artisan Equine Australia posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Want your business to be the top-listed Gym/sports Facility in Keysborough?